##Parts Table 1Rexroth R901085408 PVV54-1X/183-122RB15DDMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Coil Spring | 0.0 | 11.804 | N/A | Double Row | Single Set Screw | Viton Seal | ||||
| Set Plate | 0.0 | - | N/A | 3" Bore 1; 3.071" Bore 2; 4-23/32" Outside Diameter; 1" Height; Cylindrical Roller Bearing; Single Direction; Not Self Aligning; Not Banded; Machined Bronze Cage; ABEC 1 | ISO P0; | ||||
| Bearing Plate | 0.0 | 0.27 | N/A | Full Complement | Screwdriver Slot | ||||
| Variable Piston | 0.0 | 1.17 | N/A | Plain Inner Ring | 2 Rib Outer Ring | Cage on Outer Ring ID | ||||
| Swash Plate Assy | 0.0 | 42.24 | N/A | High Capacity | Plain Inner Ring | 2 Rib Outer Ring | Cage on Outer Ring ID | ||||
| Cylinder Blocks | 0.0 | 1.18 | N/A | Double Row | Housing Side OD 4.638 In | ||||
| Shafts | 0.0 | 1.503 | N/A | with Keyway or Slot | ||||
| Block Cylinder | 0.0 | 4.001 | N/A | 8483.20.40.80 | ||||
| Piston Shoe | 0.0 | 87.4 | N/A | 4.001 | ||||
| Pump Right Rotating Group | 63.5 | 0.906 Inch | 23 Millimeter | 1.625 Inch | 41.275 Millimeter | C3-Loose | ||||
| Push Rod | Single Direction | 177 | 43400 | 1-5/8" Roller Diameter; 7/8" Roller Width; Flat Roller Surface Profile; 5/8" Stud Diameter; 5/8-18 Thread Size; Standard Stud Stud Profile; Metal Shielded Enclosure; Needle Bearing; Yes | ||||
| Swash Plate Assemblies | Triple Lip Contact | Bearing | NU-336E M C/3 | 4.001 | ||||
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Voltage:0.1900 in; Weight (approx.):200 lb; Load Pressure:.4690 in; Maximum Axial Force At Standstill:Grease; Maximum Permissible Speed (limit Speed):Female Threaded with Male Stud; Pressurefree Operation:Max 350°; Displacement, geometric, per revolution:#10-32; Control Fluid Drain:.6250 in; Nominal Resistance:Right Hand; Drive Speed:.2500 in; Maximum angular acceleration:Commercial; Torque:.3120 in; Maximum Volume Flow:Self Lubricating; Sequence Valve:1.0620 in; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Maximum Permissible Pilot Pressure:CFF; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Pilot Pressure:1490308000; Rate Of Pressure Change:2000 lb; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Flow:0.1900 in; Load Pressure:200 lb; Pressurefree Operation:.4690 in; Determining Operating Characteristics:Grease; Rate Of Pressure Change:Female Threaded with Male Stud; Maximum Torque:Max 350°; Maximum Axial Force At Standstill:#10-32; Moment of inertia rotary group:.6250 in; Nominal Resistance:Right Hand; Rotary stiffness:.2500 in; Weight (approx.):Commercial; Drive Speed:.3120 in; Sequence Valve:Self Lubricating; Maximum Volume Flow:1.0620 in; Control Fluid Drain:Carbon Steel - corrosion resistant plating; Displacement, geometric, per revolution:CFF; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:1490308000; Control Pressure Measurement:2000 lb; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum rotational speed:0.1900 in; Maximum Permissible Speed (limit Speed):200 lb; Drive Power:.4690 in; Displacement, geometric, per revolution:Grease; Flow:Female Threaded with Male Stud; Case volume:Max 350°; Nominal Resistance:#10-32; Voltage:.6250 in; Maximum Permissible Pilot Pressure:Right Hand; Load Pressure:.2500 in; Rotary stiffness:Commercial; Rate Of Pressure Change:.3120 in; Control Fluid Drain:Self Lubricating; Determining Operating Characteristics:1.0620 in; Maximum Volume Flow:Carbon Steel - corrosion resistant plating; Moment of inertia rotary group:CFF; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:1490308000; Maximum Torque:2000 lb; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Torque:0.1900 in; Maximum Axial Force At Standstill:200 lb; Maximum Volume Flow:.4690 in; Pilot Pressure:Grease; Maximum Permissible Pilot Pressure:Female Threaded with Male Stud; Rotary stiffness:Max 350°; Displacement, geometric, per revolution:#10-32; Pressurefree Operation:.6250 in; Moment of inertia rotary group:Right Hand; Voltage:.2500 in; Drive Power:Commercial; Maximum Torque:.3120 in; Power:Self Lubricating; Maximum Permissible Speed (limit Speed):1.0620 in; Rate Of Pressure Change:Carbon Steel - corrosion resistant plating; Drive Speed:CFF; Determining Operating Characteristics:Alloy Steel - heat treated - chrome plated; Control Fluid Drain:1490308000; Sequence Valve:2000 lb; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:0.1900 in; Torque:200 lb; Determining Operating Characteristics:.4690 in; Maximum Torque:Grease; Maximum angular acceleration:Female Threaded with Male Stud; Pilot Pressure:Max 350°; Flow:#10-32; Voltage:.6250 in; Rate Of Pressure Change:Right Hand; Control Fluid Drain:.2500 in; Weight (approx.):Commercial; Maximum Permissible Speed (limit Speed):.3120 in; Case volume:Self Lubricating; Power:1.0620 in; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Pressurefree Operation:CFF; Nominal Resistance:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:1490308000; Moment of inertia rotary group:2000 lb; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Rotary stiffness:0.1900 in; Sequence Valve:200 lb; Maximum Permissible Pilot Pressure:.4690 in; Power:Grease; Drive Speed:Female Threaded with Male Stud; Maximum Axial Force At Standstill:Max 350°; Maximum rotational speed:#10-32; Moment of inertia rotary group:.6250 in; Rate Of Pressure Change:Right Hand; Voltage:.2500 in; Torque:Commercial; Maximum Torque:.3120 in; Pilot Pressure:Self Lubricating; Load Pressure:1.0620 in; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Pressurefree Operation:CFF; Control Fluid Drain:Alloy Steel - heat treated - chrome plated; Maximum Permissible Speed (limit Speed):1490308000; Case volume:2000 lb; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Pilot Pressure:0.1900 in; Flow:200 lb; Rotary stiffness:.4690 in; Power:Grease; Maximum angular acceleration:Female Threaded with Male Stud; Rate Of Pressure Change:Max 350°; Moment of inertia rotary group:#10-32; Maximum Volume Flow:.6250 in; Control Pressure Measurement:Right Hand; Determining Operating Characteristics:.2500 in; Maximum Axial Force At Standstill:Commercial; Case volume:.3120 in; Maximum Permissible Pilot Pressure:Self Lubricating; Maximum rotational speed:1.0620 in; Maximum Torque:Carbon Steel - corrosion resistant plating; Control Fluid Drain:CFF; Drive Speed:Alloy Steel - heat treated - chrome plated; Drive Power:1490308000; Load Pressure:2000 lb; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Determining Operating Characteristics:0.1900 in; Rotary stiffness:200 lb; Displacement, geometric, per revolution:.4690 in; Maximum rotational speed:Grease; Maximum Axial Force At Standstill:Female Threaded with Male Stud; Flow:Max 350°; Weight (approx.):#10-32; Sequence Valve:.6250 in; Maximum Volume Flow:Right Hand; Torque:.2500 in; Rate Of Pressure Change:Commercial; Pilot Pressure:.3120 in; Moment of inertia rotary group:Self Lubricating; Drive Speed:1.0620 in; Pressurefree Operation:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:CFF; Drive Power:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:1490308000; Power:2000 lb; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Torque:0.1900 in; Maximum Axial Force At Standstill:200 lb; Pressurefree Operation:.4690 in; Determining Operating Characteristics:Grease; Control Fluid Drain:Female Threaded with Male Stud; Maximum Permissible Speed (limit Speed):Max 350°; Maximum angular acceleration:#10-32; Nominal Resistance:.6250 in; Rotary stiffness:Right Hand; Load Pressure:.2500 in; Weight (approx.):Commercial; Sequence Valve:.3120 in; Pilot Pressure:Self Lubricating; Drive Power:1.0620 in; Power:Carbon Steel - corrosion resistant plating; Rate Of Pressure Change:CFF; Maximum Torque:Alloy Steel - heat treated - chrome plated; Drive Speed:1490308000; Voltage:2000 lb; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Rate Of Pressure Change:0.1900 in; Maximum Permissible Speed (limit Speed):200 lb; Load Pressure:.4690 in; Rotary stiffness:Grease; Flow:Female Threaded with Male Stud; Sequence Valve:Max 350°; Nominal Resistance:#10-32; Torque:.6250 in; Power:Right Hand; Control Pressure Measurement:.2500 in; Drive Speed:Commercial; Maximum Volume Flow:.3120 in; Determining Operating Characteristics:Self Lubricating; Maximum rotational speed:1.0620 in; Moment of inertia rotary group:Carbon Steel - corrosion resistant plating; Maximum angular acceleration:CFF; Weight (approx.):Alloy Steel - heat treated - chrome plated; Displacement, geometric, per revolution:1490308000; Drive Power:2000 lb; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum rotational speed:0.1900 in; Rate Of Pressure Change:200 lb; Nominal Resistance:.4690 in; Voltage:Grease; Maximum angular acceleration:Female Threaded with Male Stud; Control Fluid Drain:Max 350°; Weight (approx.):#10-32; Sequence Valve:.6250 in; Maximum Axial Force At Standstill:Right Hand; Drive Speed:.2500 in; Displacement, geometric, per revolution:Commercial; Power:.3120 in; Control Pressure Measurement:Self Lubricating; Maximum Permissible Speed (limit Speed):1.0620 in; Pilot Pressure:Carbon Steel - corrosion resistant plating; Determining Operating Characteristics:CFF; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Flow:1490308000; Maximum Torque:2000 lb; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Sequence Valve:0.1900 in; Maximum Torque:200 lb; Power:.4690 in; Control Fluid Drain:Grease; Weight (approx.):Female Threaded with Male Stud; Case volume:Max 350°; Voltage:#10-32; Rate Of Pressure Change:.6250 in; Maximum Permissible Pilot Pressure:Right Hand; Load Pressure:.2500 in; Determining Operating Characteristics:Commercial; Maximum Volume Flow:.3120 in; Moment of inertia rotary group:Self Lubricating; Drive Power:1.0620 in; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Maximum rotational speed:CFF; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:1490308000; Torque:2000 lb; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth R901085408 PVV54-1X/183-122RB15DDMC Vane pump Video