##Parts Table 1Rexroth R901069521 PVV51-1X/139-027RB15LLMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Back Plate | 75 mm | 115 mm | 20 mm | 0,672 Kg | ||||
| Press Pin | 50.8 mm | 31411705 | 33 mm | 3.03 kg | ||||
| Ball Joint | 1.938 Inch | 49.225 Millimeter | 2.32 Inch | 58.928 Millimeter | 10.721 | 4.994 | ||||
| Seal Kits | 3.6 | 63 kN | 5 mm | 1.039 | ||||
| Set Plate | 1.378 Inch | 35 Millimeter | 3.15 Inch | 80 Millimeter | 7.9 | - | ||||
| Disc Springs | 28.575x72.626x30.162 | 0,33 | 45.0 | - | ||||
| Block Springs | 300 mm | 460 mm | 118 mm | C3-Loose | ||||
| Valve Plates | 150 mm | 380 mm | 85 mm | Cast Steel | ||||
| Oil Distribution Disc Plug | 480 mm | 870 mm | 310 mm | 1820 RPM | ||||
| Coil Spring | 28,575 mm | 72,626 mm | 29,997 mm | 59 mm | ||||
| Cylinder Blocks | 0,33 | 150 mm | 85 | 89,3 kN | ||||
| Swing | 0,672 Kg | 260 r/min | 480x870x310 | 0.070 to 0.120 mm | ||||
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Flow:10 mm; Maximum Permissible Speed (limit Speed):Alloy Steel - Heat Treated; Rate Of Pressure Change:17 °; Drive Speed:17,543 N; Moment of inertia rotary group:29 mm; Voltage:17,543 N; Torque:Male Threaded; Sequence Valve:Self Lubricating; Maximum Permissible Pilot Pressure:M10 x 1.5; Load Pressure:27 mm; Pilot Pressure:Right Hand; Weight (approx.):10.50 mm; Case volume:Precision; Maximum Volume Flow:14 mm; Maximum angular acceleration:Maintenance Free/Self-Lubricating; Nominal Resistance:48 mm; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Drive Power:MK; Maximum rotational speed:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Voltage:10 mm; Weight (approx.):Alloy Steel - Heat Treated; Maximum Permissible Pilot Pressure:17 °; Nominal Resistance:17,543 N; Pilot Pressure:29 mm; Power:17,543 N; Load Pressure:Male Threaded; Maximum angular acceleration:Self Lubricating; Determining Operating Characteristics:M10 x 1.5; Drive Power:27 mm; Control Pressure Measurement:Right Hand; Maximum Torque:10.50 mm; Rate Of Pressure Change:Precision; Drive Speed:14 mm; Flow:Maintenance Free/Self-Lubricating; Maximum Axial Force At Standstill:48 mm; Sequence Valve:Carbon Steel - corrosion resistant plating; Maximum Permissible Speed (limit Speed):MK; Displacement, geometric, per revolution:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Drive Speed:10 mm; Voltage:Alloy Steel - Heat Treated; Rate Of Pressure Change:17 °; Load Pressure:17,543 N; Maximum angular acceleration:29 mm; Drive Power:17,543 N; Displacement, geometric, per revolution:Male Threaded; Maximum Permissible Speed (limit Speed):Self Lubricating; Maximum Torque:M10 x 1.5; Maximum Axial Force At Standstill:27 mm; Maximum Volume Flow:Right Hand; Case volume:10.50 mm; Moment of inertia rotary group:Precision; Weight (approx.):14 mm; Power:Maintenance Free/Self-Lubricating; Pressurefree Operation:48 mm; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Maximum Permissible Pilot Pressure:MK; Control Fluid Drain:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Rotary stiffness:10 mm; Power:Alloy Steel - Heat Treated; Torque:17 °; Maximum angular acceleration:17,543 N; Moment of inertia rotary group:29 mm; Control Pressure Measurement:17,543 N; Case volume:Male Threaded; Control Fluid Drain:Self Lubricating; Flow:M10 x 1.5; Displacement, geometric, per revolution:27 mm; Maximum Axial Force At Standstill:Right Hand; Rate Of Pressure Change:10.50 mm; Maximum Volume Flow:Precision; Pressurefree Operation:14 mm; Nominal Resistance:Maintenance Free/Self-Lubricating; Drive Speed:48 mm; Load Pressure:Carbon Steel - corrosion resistant plating; Weight (approx.):MK; Pilot Pressure:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Determining Operating Characteristics:10 mm; Displacement, geometric, per revolution:Alloy Steel - Heat Treated; Flow:17 °; Maximum rotational speed:17,543 N; Torque:29 mm; Power:17,543 N; Moment of inertia rotary group:Male Threaded; Load Pressure:Self Lubricating; Maximum angular acceleration:M10 x 1.5; Drive Speed:27 mm; Pressurefree Operation:Right Hand; Voltage:10.50 mm; Drive Power:Precision; Maximum Axial Force At Standstill:14 mm; Control Fluid Drain:Maintenance Free/Self-Lubricating; Pilot Pressure:48 mm; Maximum Permissible Pilot Pressure:Carbon Steel - corrosion resistant plating; Rotary stiffness:MK; Weight (approx.):52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Torque:10 mm; Control Fluid Drain:Alloy Steel - Heat Treated; Rotary stiffness:17 °; Maximum Axial Force At Standstill:17,543 N; Maximum angular acceleration:29 mm; Pressurefree Operation:17,543 N; Maximum Volume Flow:Male Threaded; Load Pressure:Self Lubricating; Voltage:M10 x 1.5; Maximum Permissible Speed (limit Speed):27 mm; Pilot Pressure:Right Hand; Nominal Resistance:10.50 mm; Drive Speed:Precision; Displacement, geometric, per revolution:14 mm; Drive Power:Maintenance Free/Self-Lubricating; Sequence Valve:48 mm; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Moment of inertia rotary group:MK; Flow:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Voltage:10 mm; Nominal Resistance:Alloy Steel - Heat Treated; Rotary stiffness:17 °; Maximum Volume Flow:17,543 N; Control Fluid Drain:29 mm; Drive Speed:17,543 N; Maximum angular acceleration:Male Threaded; Displacement, geometric, per revolution:Self Lubricating; Rate Of Pressure Change:M10 x 1.5; Drive Power:27 mm; Power:Right Hand; Determining Operating Characteristics:10.50 mm; Maximum rotational speed:Precision; Moment of inertia rotary group:14 mm; Pilot Pressure:Maintenance Free/Self-Lubricating; Maximum Axial Force At Standstill:48 mm; Pressurefree Operation:Carbon Steel - corrosion resistant plating; Load Pressure:MK; Weight (approx.):52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Voltage:10 mm; Pressurefree Operation:Alloy Steel - Heat Treated; Control Fluid Drain:17 °; Maximum Permissible Speed (limit Speed):17,543 N; Rate Of Pressure Change:29 mm; Drive Speed:17,543 N; Case volume:Male Threaded; Nominal Resistance:Self Lubricating; Weight (approx.):M10 x 1.5; Flow:27 mm; Torque:Right Hand; Maximum Permissible Pilot Pressure:10.50 mm; Maximum rotational speed:Precision; Displacement, geometric, per revolution:14 mm; Maximum Volume Flow:Maintenance Free/Self-Lubricating; Drive Power:48 mm; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Load Pressure:MK; Maximum angular acceleration:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Volume Flow:10 mm; Torque:Alloy Steel - Heat Treated; Power:17 °; Pressurefree Operation:17,543 N; Load Pressure:29 mm; Case volume:17,543 N; Maximum Axial Force At Standstill:Male Threaded; Maximum Permissible Pilot Pressure:Self Lubricating; Nominal Resistance:M10 x 1.5; Maximum Torque:27 mm; Drive Speed:Right Hand; Control Pressure Measurement:10.50 mm; Maximum rotational speed:Precision; Weight (approx.):14 mm; Displacement, geometric, per revolution:Maintenance Free/Self-Lubricating; Flow:48 mm; Maximum angular acceleration:Carbon Steel - corrosion resistant plating; Sequence Valve:MK; Rotary stiffness:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Permissible Pilot Pressure:10 mm; Pilot Pressure:Alloy Steel - Heat Treated; Maximum Torque:17 °; Sequence Valve:17,543 N; Pressurefree Operation:29 mm; Rotary stiffness:17,543 N; Displacement, geometric, per revolution:Male Threaded; Nominal Resistance:Self Lubricating; Maximum rotational speed:M10 x 1.5; Moment of inertia rotary group:27 mm; Load Pressure:Right Hand; Drive Speed:10.50 mm; Case volume:Precision; Torque:14 mm; Flow:Maintenance Free/Self-Lubricating; Control Fluid Drain:48 mm; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Power:MK; Voltage:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Flow:10 mm; Maximum Axial Force At Standstill:Alloy Steel - Heat Treated; Voltage:17 °; Load Pressure:17,543 N; Displacement, geometric, per revolution:29 mm; Drive Speed:17,543 N; Nominal Resistance:Male Threaded; Maximum Torque:Self Lubricating; Maximum rotational speed:M10 x 1.5; Determining Operating Characteristics:27 mm; Torque:Right Hand; Maximum angular acceleration:10.50 mm; Control Fluid Drain:Precision; Drive Power:14 mm; Maximum Volume Flow:Maintenance Free/Self-Lubricating; Rotary stiffness:48 mm; Maximum Permissible Pilot Pressure:Carbon Steel - corrosion resistant plating; Pressurefree Operation:MK; Weight (approx.):52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum rotational speed:10 mm; Voltage:Alloy Steel - Heat Treated; Sequence Valve:17 °; Torque:17,543 N; Rate Of Pressure Change:29 mm; Maximum Axial Force At Standstill:17,543 N; Maximum angular acceleration:Male Threaded; Nominal Resistance:Self Lubricating; Drive Speed:M10 x 1.5; Flow:27 mm; Maximum Torque:Right Hand; Maximum Permissible Speed (limit Speed):10.50 mm; Load Pressure:Precision; Pilot Pressure:14 mm; Displacement, geometric, per revolution:Maintenance Free/Self-Lubricating; Power:48 mm; Control Fluid Drain:Carbon Steel - corrosion resistant plating; Pressurefree Operation:MK; Rotary stiffness:52100 BEARING STEEL HEAT TREATED CHROME PLATE; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth R901069521 PVV51-1X/139-027RB15LLMC Vane pump Video