##Parts Table 1Rexroth R901104691 PVV54-1X/154-113RJ15UUMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| The Thrust Plate | 400 mm | 320 mm | 80 mm | 24,3 Kg | ||||
| Valve Plate | 120 mm | 55 mm | 29 mm | Four-Bolt Square | ||||
| Spacer | 85 mm | 1-7/16 in | 23 mm | 0.610 kg | ||||
| Block Springs | 353 mm | 55 | Metric | 0.772 | ||||
| Coil Spring | 2.835 Inch | 72 Millimeter | 1.378 Inch | 35 Millimeter | 2350 | 0.286 | ||||
| Ball Guides | 7-1/2 to 8-1/2 in | 2.4375 in | 2.38 in | 371 mm | ||||
| Gear Pump | 3.5400 in | 1-7/16 in | 4.6200 in | 2.77 in | ||||
| Drive Shaft | 3.8450 in | Triple Lip with Flinger | 320x400x80 | 1.86 lbs | ||||
| Cylinder | 42 mm | 15 mm | 13 mm | Two-Bolt Base | ||||
| Swash Plate Assy | Labyrinth | 133,000 N | 3.0000 in | 55 | ||||
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Permissible Pilot Pressure:100 mm; Weight (approx.):-40 to 120 ºC; Voltage:215 mm; Rotary stiffness:Brass; Sequence Valve:47 mm; Drive Speed:Through Hardened Steel; Moment of inertia rotary group:Straight; Maximum Volume Flow:Machined; Maximum Axial Force At Standstill:Not Split; Displacement, geometric, per revolution:Uncoated; Control Pressure Measurement:C3; Maximum Torque:47 mm; Pilot Pressure:Open; Rate Of Pressure Change:47 mm; Power:Lubrication Groove & Hole; Maximum angular acceleration:2.5 mm; Maximum rotational speed:370000 N; Load Pressure:213; Pressurefree Operation:465000 N; Maximum Permissible Speed (limit Speed):Click here; Torque:2600 rpm; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum angular acceleration:100 mm; Load Pressure:-40 to 120 ºC; Weight (approx.):215 mm; Maximum Permissible Speed (limit Speed):Brass; Determining Operating Characteristics:47 mm; Sequence Valve:Through Hardened Steel; Voltage:Straight; Maximum Axial Force At Standstill:Machined; Control Pressure Measurement:Not Split; Case volume:Uncoated; Maximum rotational speed:C3; Maximum Permissible Pilot Pressure:47 mm; Moment of inertia rotary group:Open; Maximum Volume Flow:47 mm; Power:Lubrication Groove & Hole; Rotary stiffness:2.5 mm; Torque:370000 N; Drive Speed:213; Pilot Pressure:465000 N; Flow:Click here; Nominal Resistance:2600 rpm; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Control Fluid Drain:100 mm; Case volume:-40 to 120 ºC; Nominal Resistance:215 mm; Control Pressure Measurement:Brass; Determining Operating Characteristics:47 mm; Pressurefree Operation:Through Hardened Steel; Drive Power:Straight; Moment of inertia rotary group:Machined; Displacement, geometric, per revolution:Not Split; Load Pressure:Uncoated; Pilot Pressure:C3; Maximum rotational speed:47 mm; Torque:Open; Maximum Volume Flow:47 mm; Maximum Permissible Speed (limit Speed):Lubrication Groove & Hole; Power:2.5 mm; Sequence Valve:370000 N; Voltage:213; Rotary stiffness:465000 N; Maximum Torque:Click here; Rate Of Pressure Change:2600 rpm; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Load Pressure:100 mm; Rate Of Pressure Change:-40 to 120 ºC; Moment of inertia rotary group:215 mm; Maximum Permissible Speed (limit Speed):Brass; Voltage:47 mm; Control Fluid Drain:Through Hardened Steel; Case volume:Straight; Weight (approx.):Machined; Rotary stiffness:Not Split; Power:Uncoated; Drive Speed:C3; Control Pressure Measurement:47 mm; Torque:Open; Flow:47 mm; Maximum rotational speed:Lubrication Groove & Hole; Maximum angular acceleration:2.5 mm; Maximum Volume Flow:370000 N; Maximum Axial Force At Standstill:213; Sequence Valve:465000 N; Pilot Pressure:Click here; Maximum Torque:2600 rpm; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Rate Of Pressure Change:100 mm; Pilot Pressure:-40 to 120 ºC; Drive Power:215 mm; Maximum Permissible Pilot Pressure:Brass; Sequence Valve:47 mm; Maximum Torque:Through Hardened Steel; Voltage:Straight; Load Pressure:Machined; Maximum Permissible Speed (limit Speed):Not Split; Case volume:Uncoated; Pressurefree Operation:C3; Maximum rotational speed:47 mm; Weight (approx.):Open; Maximum Axial Force At Standstill:47 mm; Power:Lubrication Groove & Hole; Control Pressure Measurement:2.5 mm; Determining Operating Characteristics:370000 N; Displacement, geometric, per revolution:213; Moment of inertia rotary group:465000 N; Torque:Click here; Maximum angular acceleration:2600 rpm; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Load Pressure:100 mm; Nominal Resistance:-40 to 120 ºC; Displacement, geometric, per revolution:215 mm; Torque:Brass; Weight (approx.):47 mm; Power:Through Hardened Steel; Maximum Torque:Straight; Voltage:Machined; Maximum Permissible Pilot Pressure:Not Split; Flow:Uncoated; Pilot Pressure:C3; Moment of inertia rotary group:47 mm; Rate Of Pressure Change:Open; Determining Operating Characteristics:47 mm; Maximum Axial Force At Standstill:Lubrication Groove & Hole; Control Fluid Drain:2.5 mm; Maximum angular acceleration:370000 N; Maximum Volume Flow:213; Pressurefree Operation:465000 N; Case volume:Click here; Drive Speed:2600 rpm; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Drive Speed:100 mm; Rate Of Pressure Change:-40 to 120 ºC; Maximum angular acceleration:215 mm; Maximum Volume Flow:Brass; Pilot Pressure:47 mm; Determining Operating Characteristics:Through Hardened Steel; Nominal Resistance:Straight; Voltage:Machined; Maximum rotational speed:Not Split; Case volume:Uncoated; Rotary stiffness:C3; Sequence Valve:47 mm; Weight (approx.):Open; Maximum Axial Force At Standstill:47 mm; Load Pressure:Lubrication Groove & Hole; Power:2.5 mm; Control Pressure Measurement:370000 N; Displacement, geometric, per revolution:213; Maximum Permissible Speed (limit Speed):465000 N; Drive Power:Click here; Pressurefree Operation:2600 rpm; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:100 mm; Determining Operating Characteristics:-40 to 120 ºC; Sequence Valve:215 mm; Maximum angular acceleration:Brass; Pressurefree Operation:47 mm; Case volume:Through Hardened Steel; Maximum Permissible Speed (limit Speed):Straight; Rotary stiffness:Machined; Maximum Volume Flow:Not Split; Pilot Pressure:Uncoated; Load Pressure:C3; Moment of inertia rotary group:47 mm; Flow:Open; Control Fluid Drain:47 mm; Drive Power:Lubrication Groove & Hole; Control Pressure Measurement:2.5 mm; Power:370000 N; Weight (approx.):213; Displacement, geometric, per revolution:465000 N; Torque:Click here; Nominal Resistance:2600 rpm; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Nominal Resistance:100 mm; Flow:-40 to 120 ºC; Rotary stiffness:215 mm; Drive Speed:Brass; Rate Of Pressure Change:47 mm; Torque:Through Hardened Steel; Maximum rotational speed:Straight; Load Pressure:Machined; Displacement, geometric, per revolution:Not Split; Weight (approx.):Uncoated; Maximum angular acceleration:C3; Maximum Permissible Pilot Pressure:47 mm; Maximum Volume Flow:Open; Control Fluid Drain:47 mm; Maximum Axial Force At Standstill:Lubrication Groove & Hole; Sequence Valve:2.5 mm; Power:370000 N; Maximum Torque:213; Pressurefree Operation:465000 N; Voltage:Click here; Maximum Permissible Speed (limit Speed):2600 rpm; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Nominal Resistance:100 mm; Moment of inertia rotary group:-40 to 120 ºC; Load Pressure:215 mm; Torque:Brass; Rotary stiffness:47 mm; Maximum Permissible Pilot Pressure:Through Hardened Steel; Maximum Axial Force At Standstill:Straight; Flow:Machined; Maximum rotational speed:Not Split; Determining Operating Characteristics:Uncoated; Case volume:C3; Sequence Valve:47 mm; Pressurefree Operation:Open; Maximum angular acceleration:47 mm; Drive Power:Lubrication Groove & Hole; Maximum Volume Flow:2.5 mm; Rate Of Pressure Change:370000 N; Displacement, geometric, per revolution:213; Voltage:465000 N; Control Pressure Measurement:Click here; Pilot Pressure:2600 rpm; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Axial Force At Standstill:100 mm; Maximum Permissible Pilot Pressure:-40 to 120 ºC; Maximum Torque:215 mm; Rotary stiffness:Brass; Rate Of Pressure Change:47 mm; Determining Operating Characteristics:Through Hardened Steel; Maximum angular acceleration:Straight; Control Pressure Measurement:Machined; Drive Power:Not Split; Moment of inertia rotary group:Uncoated; Control Fluid Drain:C3; Power:47 mm; Sequence Valve:Open; Load Pressure:47 mm; Maximum Permissible Speed (limit Speed):Lubrication Groove & Hole; Case volume:2.5 mm; Torque:370000 N; Maximum rotational speed:213; Weight (approx.):465000 N; Maximum Volume Flow:Click here; Nominal Resistance:2600 rpm; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Torque:100 mm; Control Fluid Drain:-40 to 120 ºC; Maximum Torque:215 mm; Rate Of Pressure Change:Brass; Moment of inertia rotary group:47 mm; Case volume:Through Hardened Steel; Maximum Volume Flow:Straight; Power:Machined; Determining Operating Characteristics:Not Split; Maximum angular acceleration:Uncoated; Maximum Permissible Pilot Pressure:C3; Maximum rotational speed:47 mm; Drive Power:Open; Load Pressure:47 mm; Pilot Pressure:Lubrication Groove & Hole; Nominal Resistance:2.5 mm; Pressurefree Operation:370000 N; Voltage:213; Drive Speed:465000 N; Maximum Axial Force At Standstill:Click here; Weight (approx.):2600 rpm; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Rexroth R901104691 PVV54-1X/154-113RJ15UUMC Vane pump Video