##Parts Table 1Rexroth R901108431 PVV5-1X/154RJ15DVC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Piston Shoe | 60 mm | 0.15 KGS | 52,5 kN | 5,2 Kg | ||||
| Valve Plate | 170 mm | 360 mm | 1220 kN | 62.6 Kg | ||||
| Cylinder Block | 105 mm | 145 mm | 43,5 kN | 0,87 Kg | ||||
| Shafts | 45 mm | 68 mm | 12 000 kN | 0.04 kg | ||||
| Push Rod | 19.5 Inch | 495.3 Millimeter | 24.75 Inch | 628.65 Millimeter | 2.835 Inch | 72.009 Millimeter | 40.8 | ||||
| Gear Pump | 1.438 Inch | 36.525 Millimeter | 2.835 Inch | 72.009 Millimeter | 18 mm | 0.5 | ||||
| Separator | 1300 | 80,8 mm | 62mm | 0.68 | ||||
| Cylinder | 1.51 | http://www.timken.com | Insert | 0.015 | ||||
| Pressure Plate | - | 0.748 Inch | 18.999 Millimeter | 105 | 9.3 | ||||
| Regulator | 5,2 Kg | 20.5625 in | 25,000 rpm | 89.948 | ||||
| Bearing Plate | 35mm | 62mm | 7201 | 4 | ||||
| Plunger Sliding Boots | 125 mm | 280 mm | 93 mm | 125 mm | ||||
| Swing | 12 mm | 32 mm | 10 mm | 145 mm | ||||
| Ball Guides | 0,6 mm | Wide Inner Ring | - | 0.04 kg | ||||
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Rate Of Pressure Change:0.6250 in; Torque:1000 lb; Nominal Resistance:1.3440 in; Moment of inertia rotary group:Grease; Maximum rotational speed:Female Threaded with Male Stud; Maximum Axial Force At Standstill:Max 350°; Control Fluid Drain:Left Hand; Drive Speed:1.5000 in; Load Pressure:Commercial; Drive Power:.5620 in; Control Pressure Measurement:No Fitting; Displacement, geometric, per revolution:.7500 in; Rotary stiffness:Carbon Steel - corrosion resistant plating; Case volume:2.5000 in; Maximum angular acceleration:Alloy Steel - heat treated - chrome plated; Pilot Pressure:CFF; Power:10000 lb; Maximum Permissible Pilot Pressure:1591008000; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Rotary stiffness:0.6250 in; Control Fluid Drain:1000 lb; Pressurefree Operation:1.3440 in; Nominal Resistance:Grease; Rate Of Pressure Change:Female Threaded with Male Stud; Flow:Max 350°; Maximum Axial Force At Standstill:Left Hand; Control Pressure Measurement:1.5000 in; Load Pressure:Commercial; Determining Operating Characteristics:.5620 in; Sequence Valve:No Fitting; Moment of inertia rotary group:.7500 in; Weight (approx.):Carbon Steel - corrosion resistant plating; Drive Speed:2.5000 in; Drive Power:Alloy Steel - heat treated - chrome plated; Voltage:CFF; Case volume:10000 lb; Maximum Torque:1591008000; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Determining Operating Characteristics:0.6250 in; Drive Power:1000 lb; Maximum Permissible Speed (limit Speed):1.3440 in; Weight (approx.):Grease; Rate Of Pressure Change:Female Threaded with Male Stud; Maximum Volume Flow:Max 350°; Control Pressure Measurement:Left Hand; Sequence Valve:1.5000 in; Pressurefree Operation:Commercial; Flow:.5620 in; Maximum Axial Force At Standstill:No Fitting; Displacement, geometric, per revolution:.7500 in; Drive Speed:Carbon Steel - corrosion resistant plating; Torque:2.5000 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Rotary stiffness:CFF; Maximum angular acceleration:10000 lb; Maximum Torque:1591008000; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Load Pressure:0.6250 in; Maximum angular acceleration:1000 lb; Case volume:1.3440 in; Voltage:Grease; Nominal Resistance:Female Threaded with Male Stud; Maximum Volume Flow:Max 350°; Flow:Left Hand; Maximum Torque:1.5000 in; Power:Commercial; Maximum Permissible Speed (limit Speed):.5620 in; Drive Speed:No Fitting; Displacement, geometric, per revolution:.7500 in; Torque:Carbon Steel - corrosion resistant plating; Determining Operating Characteristics:2.5000 in; Weight (approx.):Alloy Steel - heat treated - chrome plated; Control Fluid Drain:CFF; Drive Power:10000 lb; Maximum Permissible Pilot Pressure:1591008000; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum angular acceleration:0.6250 in; Rate Of Pressure Change:1000 lb; Pressurefree Operation:1.3440 in; Load Pressure:Grease; Drive Speed:Female Threaded with Male Stud; Case volume:Max 350°; Weight (approx.):Left Hand; Torque:1.5000 in; Maximum Permissible Speed (limit Speed):Commercial; Drive Power:.5620 in; Nominal Resistance:No Fitting; Maximum Axial Force At Standstill:.7500 in; Rotary stiffness:Carbon Steel - corrosion resistant plating; Displacement, geometric, per revolution:2.5000 in; Flow:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:CFF; Maximum Volume Flow:10000 lb; Determining Operating Characteristics:1591008000; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Torque:0.6250 in; Rate Of Pressure Change:1000 lb; Maximum Permissible Pilot Pressure:1.3440 in; Maximum Permissible Speed (limit Speed):Grease; Rotary stiffness:Female Threaded with Male Stud; Maximum Volume Flow:Max 350°; Weight (approx.):Left Hand; Drive Speed:1.5000 in; Sequence Valve:Commercial; Case volume:.5620 in; Control Fluid Drain:No Fitting; Maximum rotational speed:.7500 in; Maximum Torque:Carbon Steel - corrosion resistant plating; Displacement, geometric, per revolution:2.5000 in; Nominal Resistance:Alloy Steel - heat treated - chrome plated; Drive Power:CFF; Voltage:10000 lb; Moment of inertia rotary group:1591008000; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Pressurefree Operation:0.6250 in; Nominal Resistance:1000 lb; Case volume:1.3440 in; Voltage:Grease; Rate Of Pressure Change:Female Threaded with Male Stud; Sequence Valve:Max 350°; Maximum Permissible Pilot Pressure:Left Hand; Maximum Axial Force At Standstill:1.5000 in; Drive Speed:Commercial; Flow:.5620 in; Maximum rotational speed:No Fitting; Maximum angular acceleration:.7500 in; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Drive Power:2.5000 in; Control Fluid Drain:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:CFF; Maximum Torque:10000 lb; Displacement, geometric, per revolution:1591008000; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Control Fluid Drain:0.6250 in; Maximum Axial Force At Standstill:1000 lb; Weight (approx.):1.3440 in; Pilot Pressure:Grease; Load Pressure:Female Threaded with Male Stud; Pressurefree Operation:Max 350°; Maximum angular acceleration:Left Hand; Displacement, geometric, per revolution:1.5000 in; Moment of inertia rotary group:Commercial; Drive Power:.5620 in; Rotary stiffness:No Fitting; Sequence Valve:.7500 in; Voltage:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:2.5000 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Determining Operating Characteristics:CFF; Maximum Permissible Speed (limit Speed):10000 lb; Torque:1591008000; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:0.6250 in; Maximum Permissible Speed (limit Speed):1000 lb; Moment of inertia rotary group:1.3440 in; Drive Speed:Grease; Load Pressure:Female Threaded with Male Stud; Voltage:Max 350°; Control Pressure Measurement:Left Hand; Nominal Resistance:1.5000 in; Drive Power:Commercial; Case volume:.5620 in; Pilot Pressure:No Fitting; Maximum rotational speed:.7500 in; Control Fluid Drain:Carbon Steel - corrosion resistant plating; Torque:2.5000 in; Power:Alloy Steel - heat treated - chrome plated; Maximum Torque:CFF; Displacement, geometric, per revolution:10000 lb; Maximum angular acceleration:1591008000; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Drive Speed:0.6250 in; Maximum Axial Force At Standstill:1000 lb; Control Fluid Drain:1.3440 in; Torque:Grease; Maximum Permissible Pilot Pressure:Female Threaded with Male Stud; Control Pressure Measurement:Max 350°; Load Pressure:Left Hand; Pilot Pressure:1.5000 in; Flow:Commercial; Maximum angular acceleration:.5620 in; Voltage:No Fitting; Nominal Resistance:.7500 in; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Displacement, geometric, per revolution:2.5000 in; Weight (approx.):Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:CFF; Maximum Volume Flow:10000 lb; Case volume:1591008000; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Voltage:0.6250 in; Maximum Volume Flow:1000 lb; Control Fluid Drain:1.3440 in; Drive Power:Grease; Determining Operating Characteristics:Female Threaded with Male Stud; Torque:Max 350°; Maximum Torque:Left Hand; Maximum rotational speed:1.5000 in; Flow:Commercial; Pilot Pressure:.5620 in; Case volume:No Fitting; Control Pressure Measurement:.7500 in; Nominal Resistance:Carbon Steel - corrosion resistant plating; Drive Speed:2.5000 in; Power:Alloy Steel - heat treated - chrome plated; Displacement, geometric, per revolution:CFF; Maximum angular acceleration:10000 lb; Sequence Valve:1591008000; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Rate Of Pressure Change:0.6250 in; Nominal Resistance:1000 lb; Drive Power:1.3440 in; Maximum Permissible Pilot Pressure:Grease; Maximum rotational speed:Female Threaded with Male Stud; Moment of inertia rotary group:Max 350°; Drive Speed:Left Hand; Weight (approx.):1.5000 in; Control Fluid Drain:Commercial; Torque:.5620 in; Maximum Volume Flow:No Fitting; Voltage:.7500 in; Maximum Torque:Carbon Steel - corrosion resistant plating; Case volume:2.5000 in; Power:Alloy Steel - heat treated - chrome plated; Load Pressure:CFF; Sequence Valve:10000 lb; Pressurefree Operation:1591008000; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth R901108431 PVV5-1X/154RJ15DVC Vane pump Video