##Parts Table 1Rexroth R900618320 PVV54-1X/139-069RA15UUMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Block Cylinder | 12,7 mm | 3,31 kN | 7,938 | 0,0046 Kg | ||||
| Barrel Washer | 870 mm | 272 mm | 530 mm | 1 Seal | ||||
| Servo Piston | 140 mm | 142 kN | 55 mm | 2,707 Kg | ||||
| Regulator | 170 mm | 401 kN | 80 mm | 6,4 Kg | ||||
| Drive Shaft | 13 mm | 0,83 kN | 6 mm | 2 Rib Outer Ring | Drawn Cup Bearing | Steel Cage | ||||
| The Thrust Plate | KOYO | 55x140x33 | 150,000 N | 1.68 | ||||
| Set Plate | 142 kN | 128,000 N | 150 kN | 0.075 | ||||
| Spacer | B04144 | 3.0 | 12,7 mm | 1.544 | ||||
| The Ball Hinge Spring | 1.1 mm | 14.27 mm | 8482.40.00.00 | - | ||||
| Block Springs | 140 | 0.075 | 143,7 mm | 2.73 | ||||
| Cylinder Blocks | 28.575 mm | 14.27 mm | 0.0 | Needle | ||||
| Retainer Plate | 180 mm | 34 mm | 100 mm | 168 mm | ||||
| Snap Ring | 12,7 | KOYO | 530 | 14.27 | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Maximum Axial Force At Standstill:0.9375 in; Sequence Valve:2150 lbf; Control Fluid Drain:3.0000 in; Displacement, geometric, per revolution:1080 lbf; Voltage:3.8125 in; Drive Speed:Contact Seal; Control Pressure Measurement:Round; Determining Operating Characteristics:0.866 in; Rate Of Pressure Change:Standard Duty; Pressurefree Operation:Cannot Be Relubricated; Drive Power:Two-Bolt Flange; Flow:BLCTE200NP; Maximum Volume Flow:Malleable Iron - Nickel Protection; Maximum angular acceleration:B5-15; Pilot Pressure:Set Screw; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Rate Of Pressure Change:0.9375 in; Maximum Torque:2150 lbf; Nominal Resistance:3.0000 in; Maximum Permissible Pilot Pressure:1080 lbf; Rotary stiffness:3.8125 in; Drive Power:Contact Seal; Displacement, geometric, per revolution:Round; Moment of inertia rotary group:0.866 in; Maximum angular acceleration:Standard Duty; Weight (approx.):Cannot Be Relubricated; Flow:Two-Bolt Flange; Sequence Valve:BLCTE200NP; Maximum Permissible Speed (limit Speed):Malleable Iron - Nickel Protection; Case volume:B5-15; Torque:Set Screw; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Nominal Resistance:0.9375 in; Weight (approx.):2150 lbf; Maximum Permissible Pilot Pressure:3.0000 in; Torque:1080 lbf; Rotary stiffness:3.8125 in; Rate Of Pressure Change:Contact Seal; Pilot Pressure:Round; Voltage:0.866 in; Moment of inertia rotary group:Standard Duty; Maximum Axial Force At Standstill:Cannot Be Relubricated; Case volume:Two-Bolt Flange; Flow:BLCTE200NP; Sequence Valve:Malleable Iron - Nickel Protection; Maximum Torque:B5-15; Control Pressure Measurement:Set Screw; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Flow:0.9375 in; Pilot Pressure:2150 lbf; Maximum angular acceleration:3.0000 in; Case volume:1080 lbf; Maximum rotational speed:3.8125 in; Moment of inertia rotary group:Contact Seal; Drive Power:Round; Control Fluid Drain:0.866 in; Voltage:Standard Duty; Displacement, geometric, per revolution:Cannot Be Relubricated; Load Pressure:Two-Bolt Flange; Rate Of Pressure Change:BLCTE200NP; Maximum Permissible Pilot Pressure:Malleable Iron - Nickel Protection; Maximum Permissible Speed (limit Speed):B5-15; Power:Set Screw; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Displacement, geometric, per revolution:0.9375 in; Nominal Resistance:2150 lbf; Control Fluid Drain:3.0000 in; Sequence Valve:1080 lbf; Maximum Permissible Speed (limit Speed):3.8125 in; Voltage:Contact Seal; Case volume:Round; Drive Speed:0.866 in; Maximum Torque:Standard Duty; Maximum Permissible Pilot Pressure:Cannot Be Relubricated; Weight (approx.):Two-Bolt Flange; Control Pressure Measurement:BLCTE200NP; Determining Operating Characteristics:Malleable Iron - Nickel Protection; Load Pressure:B5-15; Drive Power:Set Screw; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Voltage:0.9375 in; Maximum Axial Force At Standstill:2150 lbf; Displacement, geometric, per revolution:3.0000 in; Drive Power:1080 lbf; Load Pressure:3.8125 in; Maximum rotational speed:Contact Seal; Weight (approx.):Round; Moment of inertia rotary group:0.866 in; Control Fluid Drain:Standard Duty; Pressurefree Operation:Cannot Be Relubricated; Maximum angular acceleration:Two-Bolt Flange; Torque:BLCTE200NP; Control Pressure Measurement:Malleable Iron - Nickel Protection; Determining Operating Characteristics:B5-15; Drive Speed:Set Screw; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Case volume:0.9375 in; Rate Of Pressure Change:2150 lbf; Load Pressure:3.0000 in; Sequence Valve:1080 lbf; Pressurefree Operation:3.8125 in; Flow:Contact Seal; Maximum angular acceleration:Round; Pilot Pressure:0.866 in; Maximum Volume Flow:Standard Duty; Voltage:Cannot Be Relubricated; Nominal Resistance:Two-Bolt Flange; Maximum Permissible Speed (limit Speed):BLCTE200NP; Maximum rotational speed:Malleable Iron - Nickel Protection; Displacement, geometric, per revolution:B5-15; Determining Operating Characteristics:Set Screw; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Moment of inertia rotary group:0.9375 in; Sequence Valve:2150 lbf; Maximum Torque:3.0000 in; Voltage:1080 lbf; Maximum Volume Flow:3.8125 in; Rotary stiffness:Contact Seal; Flow:Round; Pressurefree Operation:0.866 in; Maximum rotational speed:Standard Duty; Load Pressure:Cannot Be Relubricated; Control Pressure Measurement:Two-Bolt Flange; Displacement, geometric, per revolution:BLCTE200NP; Nominal Resistance:Malleable Iron - Nickel Protection; Determining Operating Characteristics:B5-15; Case volume:Set Screw; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Control Pressure Measurement:0.9375 in; Maximum Volume Flow:2150 lbf; Control Fluid Drain:3.0000 in; Weight (approx.):1080 lbf; Maximum Axial Force At Standstill:3.8125 in; Flow:Contact Seal; Rotary stiffness:Round; Determining Operating Characteristics:0.866 in; Pilot Pressure:Standard Duty; Sequence Valve:Cannot Be Relubricated; Maximum rotational speed:Two-Bolt Flange; Load Pressure:BLCTE200NP; Case volume:Malleable Iron - Nickel Protection; Pressurefree Operation:B5-15; Drive Speed:Set Screw; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Power:0.9375 in; Maximum rotational speed:2150 lbf; Weight (approx.):3.0000 in; Drive Power:1080 lbf; Maximum Permissible Speed (limit Speed):3.8125 in; Maximum Permissible Pilot Pressure:Contact Seal; Voltage:Round; Control Fluid Drain:0.866 in; Rate Of Pressure Change:Standard Duty; Case volume:Cannot Be Relubricated; Pressurefree Operation:Two-Bolt Flange; Maximum Axial Force At Standstill:BLCTE200NP; Moment of inertia rotary group:Malleable Iron - Nickel Protection; Determining Operating Characteristics:B5-15; Load Pressure:Set Screw; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:0.9375 in; Power:2150 lbf; Maximum Torque:3.0000 in; Determining Operating Characteristics:1080 lbf; Control Fluid Drain:3.8125 in; Weight (approx.):Contact Seal; Maximum angular acceleration:Round; Rotary stiffness:0.866 in; Drive Speed:Standard Duty; Sequence Valve:Cannot Be Relubricated; Moment of inertia rotary group:Two-Bolt Flange; Load Pressure:BLCTE200NP; Pilot Pressure:Malleable Iron - Nickel Protection; Maximum Permissible Pilot Pressure:B5-15; Control Pressure Measurement:Set Screw; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum angular acceleration:0.9375 in; Drive Speed:2150 lbf; Moment of inertia rotary group:3.0000 in; Nominal Resistance:1080 lbf; Maximum Permissible Speed (limit Speed):3.8125 in; Case volume:Contact Seal; Maximum Axial Force At Standstill:Round; Rotary stiffness:0.866 in; Control Fluid Drain:Standard Duty; Power:Cannot Be Relubricated; Pilot Pressure:Two-Bolt Flange; Flow:BLCTE200NP; Determining Operating Characteristics:Malleable Iron - Nickel Protection; Torque:B5-15; Maximum Volume Flow:Set Screw; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth R900618320 PVV54-1X/139-069RA15UUMC Vane pump Video