##Parts Table 1Rexroth PVQ54-1X/139-082RA15UUMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Block Cylinder | 0.0 | 2.165 Inch | 55 Millimeter | 6.81 | N/A | ||||
| Bearings | 0.0 | 4.724 Inch | 120 Millimeter | 4.16 | N/A | ||||
| Inclined Plate | 0.0 | 0.866 Inch | 22 Millimeter | 2.674 | N/A | ||||
| Back Plate | 0.0 | 60MM Bore; 110MM Outside Diameter; 22MM Width; Open Enclosure; ABEC 5 | ISO P5 Precision; Steel Ball Material; 1 (Single) Bearings; 0 Degree Contact Angle; Brass Cage Material; Ball Bearing | 8.08 lb | N/A | ||||
| Swing | 0.0 | 2.362 Inch | 60 Millimeter | 0.778 | N/A | ||||
| Retainer Plate | 0.0 | 15 | 0.005 | N/A | ||||
| Piston Sets | 1.6875 in | 1.6875 in | 4-39/64 in | 0.01 | ||||
| Valve Plates | Open | 70 mm | 85 mm | 92 mm | ||||
| Spindle | Cast Iron | 15 mm | 85 mm | TM620-400 | ||||
| Friction Plate | 15 mm | 319 mm | GYE55KRRB SGT | Shroud Seal | ||||
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:0.3125 in; Nominal Resistance:7500 lb; Drive Speed:7 °; Displacement, geometric, per revolution:750 lb; Maximum Volume Flow:1.2190 in; Torque:Grease; Maximum angular acceleration:Male Threaded; Maximum rotational speed:Max 350°; Moment of inertia rotary group:Left Hand; Case volume:.8750 in; Pilot Pressure:Precision Extra Capacity; Weight (approx.):.3440 in; Maximum Permissible Speed (limit Speed):No Fitting; Load Pressure:.4370 in; Sequence Valve:4130 Alloy Steel - heat treated - corrosion resistant plating; Maximum Torque:1.8750 in; Determining Operating Characteristics:Alloy Steel - heat treated - chrome plated; Power:ARE-20; Rotary stiffness:Carbon Steel - corrosion resistant plating; Drive Power:1540502000; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Rate Of Pressure Change:0.3125 in; Sequence Valve:7500 lb; Pressurefree Operation:7 °; Maximum rotational speed:750 lb; Torque:1.2190 in; Maximum Torque:Grease; Determining Operating Characteristics:Male Threaded; Maximum Permissible Speed (limit Speed):Max 350°; Moment of inertia rotary group:Left Hand; Control Pressure Measurement:.8750 in; Control Fluid Drain:Precision Extra Capacity; Voltage:.3440 in; Rotary stiffness:No Fitting; Maximum Permissible Pilot Pressure:.4370 in; Drive Power:4130 Alloy Steel - heat treated - corrosion resistant plating; Power:1.8750 in; Load Pressure:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:ARE-20; Weight (approx.):Carbon Steel - corrosion resistant plating; Maximum Axial Force At Standstill:1540502000; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Control Fluid Drain:0.3125 in; Maximum rotational speed:7500 lb; Maximum Permissible Speed (limit Speed):7 °; Weight (approx.):750 lb; Voltage:1.2190 in; Pressurefree Operation:Grease; Power:Male Threaded; Pilot Pressure:Max 350°; Determining Operating Characteristics:Left Hand; Rate Of Pressure Change:.8750 in; Drive Power:Precision Extra Capacity; Maximum Volume Flow:.3440 in; Load Pressure:No Fitting; Control Pressure Measurement:.4370 in; Torque:4130 Alloy Steel - heat treated - corrosion resistant plating; Moment of inertia rotary group:1.8750 in; Case volume:Alloy Steel - heat treated - chrome plated; Drive Speed:ARE-20; Displacement, geometric, per revolution:Carbon Steel - corrosion resistant plating; Sequence Valve:1540502000; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Drive Speed:0.3125 in; Rate Of Pressure Change:7500 lb; Pressurefree Operation:7 °; Displacement, geometric, per revolution:750 lb; Sequence Valve:1.2190 in; Torque:Grease; Rotary stiffness:Male Threaded; Control Pressure Measurement:Max 350°; Maximum Permissible Speed (limit Speed):Left Hand; Maximum Axial Force At Standstill:.8750 in; Determining Operating Characteristics:Precision Extra Capacity; Voltage:.3440 in; Weight (approx.):No Fitting; Pilot Pressure:.4370 in; Maximum Permissible Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Drive Power:1.8750 in; Maximum Torque:Alloy Steel - heat treated - chrome plated; Load Pressure:ARE-20; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Control Fluid Drain:1540502000; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Torque:0.3125 in; Displacement, geometric, per revolution:7500 lb; Nominal Resistance:7 °; Maximum Volume Flow:750 lb; Maximum rotational speed:1.2190 in; Determining Operating Characteristics:Grease; Flow:Male Threaded; Pressurefree Operation:Max 350°; Voltage:Left Hand; Moment of inertia rotary group:.8750 in; Maximum Permissible Pilot Pressure:Precision Extra Capacity; Rate Of Pressure Change:.3440 in; Maximum angular acceleration:No Fitting; Maximum Permissible Speed (limit Speed):.4370 in; Drive Speed:4130 Alloy Steel - heat treated - corrosion resistant plating; Sequence Valve:1.8750 in; Load Pressure:Alloy Steel - heat treated - chrome plated; Control Pressure Measurement:ARE-20; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Case volume:1540502000; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Rate Of Pressure Change:0.3125 in; Pilot Pressure:7500 lb; Control Pressure Measurement:7 °; Maximum rotational speed:750 lb; Maximum Torque:1.2190 in; Flow:Grease; Maximum Volume Flow:Male Threaded; Sequence Valve:Max 350°; Maximum Permissible Pilot Pressure:Left Hand; Weight (approx.):.8750 in; Torque:Precision Extra Capacity; Maximum angular acceleration:.3440 in; Drive Power:No Fitting; Power:.4370 in; Maximum Permissible Speed (limit Speed):4130 Alloy Steel - heat treated - corrosion resistant plating; Control Fluid Drain:1.8750 in; Case volume:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:ARE-20; Load Pressure:Carbon Steel - corrosion resistant plating; Voltage:1540502000; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Load Pressure:0.3125 in; Control Pressure Measurement:7500 lb; Case volume:7 °; Maximum Axial Force At Standstill:750 lb; Control Fluid Drain:1.2190 in; Maximum rotational speed:Grease; Moment of inertia rotary group:Male Threaded; Voltage:Max 350°; Rotary stiffness:Left Hand; Maximum Permissible Pilot Pressure:.8750 in; Power:Precision Extra Capacity; Drive Power:.3440 in; Nominal Resistance:No Fitting; Flow:.4370 in; Maximum angular acceleration:4130 Alloy Steel - heat treated - corrosion resistant plating; Displacement, geometric, per revolution:1.8750 in; Pressurefree Operation:Alloy Steel - heat treated - chrome plated; Maximum Torque:ARE-20; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Torque:1540502000; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Displacement, geometric, per revolution:0.3125 in; Moment of inertia rotary group:7500 lb; Maximum Permissible Pilot Pressure:7 °; Nominal Resistance:750 lb; Weight (approx.):1.2190 in; Case volume:Grease; Load Pressure:Male Threaded; Rate Of Pressure Change:Max 350°; Maximum Torque:Left Hand; Maximum Volume Flow:.8750 in; Control Pressure Measurement:Precision Extra Capacity; Maximum rotational speed:.3440 in; Determining Operating Characteristics:No Fitting; Drive Power:.4370 in; Flow:4130 Alloy Steel - heat treated - corrosion resistant plating; Rotary stiffness:1.8750 in; Drive Speed:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:ARE-20; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Maximum angular acceleration:1540502000; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum Permissible Speed (limit Speed):0.3125 in; Maximum rotational speed:7500 lb; Maximum Permissible Pilot Pressure:7 °; Weight (approx.):750 lb; Maximum Volume Flow:1.2190 in; Control Fluid Drain:Grease; Sequence Valve:Male Threaded; Maximum Axial Force At Standstill:Max 350°; Maximum angular acceleration:Left Hand; Determining Operating Characteristics:.8750 in; Drive Speed:Precision Extra Capacity; Voltage:.3440 in; Displacement, geometric, per revolution:No Fitting; Case volume:.4370 in; Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Flow:1.8750 in; Drive Power:Alloy Steel - heat treated - chrome plated; Nominal Resistance:ARE-20; Torque:Carbon Steel - corrosion resistant plating; Maximum Torque:1540502000; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Moment of inertia rotary group:0.3125 in; Sequence Valve:7500 lb; Power:7 °; Nominal Resistance:750 lb; Displacement, geometric, per revolution:1.2190 in; Maximum Volume Flow:Grease; Load Pressure:Male Threaded; Flow:Max 350°; Maximum Permissible Pilot Pressure:Left Hand; Maximum angular acceleration:.8750 in; Determining Operating Characteristics:Precision Extra Capacity; Rate Of Pressure Change:.3440 in; Pressurefree Operation:No Fitting; Control Fluid Drain:.4370 in; Drive Speed:4130 Alloy Steel - heat treated - corrosion resistant plating; Rotary stiffness:1.8750 in; Maximum Axial Force At Standstill:Alloy Steel - heat treated - chrome plated; Torque:ARE-20; Maximum Torque:Carbon Steel - corrosion resistant plating; Maximum rotational speed:1540502000; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Load Pressure:0.3125 in; Determining Operating Characteristics:7500 lb; Weight (approx.):7 °; Voltage:750 lb; Maximum Torque:1.2190 in; Drive Power:Grease; Nominal Resistance:Male Threaded; Control Pressure Measurement:Max 350°; Case volume:Left Hand; Flow:.8750 in; Maximum Permissible Speed (limit Speed):Precision Extra Capacity; Maximum Permissible Pilot Pressure:.3440 in; Drive Speed:No Fitting; Pressurefree Operation:.4370 in; Maximum Volume Flow:4130 Alloy Steel - heat treated - corrosion resistant plating; Power:1.8750 in; Torque:Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:ARE-20; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Rotary stiffness:1540502000; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Voltage:0.3125 in; Load Pressure:7500 lb; Moment of inertia rotary group:7 °; Weight (approx.):750 lb; Control Fluid Drain:1.2190 in; Determining Operating Characteristics:Grease; Rate Of Pressure Change:Male Threaded; Pilot Pressure:Max 350°; Maximum Torque:Left Hand; Maximum Permissible Speed (limit Speed):.8750 in; Nominal Resistance:Precision Extra Capacity; Rotary stiffness:.3440 in; Case volume:No Fitting; Power:.4370 in; Maximum Axial Force At Standstill:4130 Alloy Steel - heat treated - corrosion resistant plating; Pressurefree Operation:1.8750 in; Displacement, geometric, per revolution:Alloy Steel - heat treated - chrome plated; Flow:ARE-20; Sequence Valve:Carbon Steel - corrosion resistant plating; Maximum rotational speed:1540502000; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Rexroth PVQ54-1X/139-082RA15UUMC Vane pump Video