##Parts Table 1Rexroth PVV4-1X/122RA15DMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ball Guides | 100 mm | 170 mm | 3,65 Kg | 2 Metal Shields | ||||
| Separator | 30 mm | 72 mm | 0,346 Kg | 19 mm | ||||
| Oil Distribution Plate | 45 mm | 85 mm | 0.68 kg | 49.2 mm | ||||
| Piston Sets | 0.669 Inch | 17 Millimeter | 1.378 Inch | 35 Millimeter | 0.039 | 0.394 Inch | 10 Millimeter | ||||
| Drive Shaft | 1.02 | 72 | 10.7 | Radial | ||||
| Oil Distribution Disc Plug | 1.5000 in | 2.4375 in | 1.09 lbs | 38 | ||||
| Piston Shoe | 26,7 kN | Deep Groove Ball Bearings | 6.38 lbs | Angular Contact Ball | ||||
| Block Cylinder | 0.68 kg | 44 | 8500 mm/min | 11/16 – 18 | ||||
| Set Plate | 17mm | 35mm | 66 cm³ | 10mm | ||||
| Press Pin | 200mm | 360mm | 17mm | 98mm | ||||
| Housings Casings | 160 mm | 240 mm | 9600 r/min | 38 mm | ||||
| Barrel Washer | Single | 6.76 | N/A | 160MM Bore; 240MM Outside Diameter; 38MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 1 (Single) Bearings; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring R | ||||
| Friction Plate | 235 mm | 129 mm | 15 kN | 40 mm | ||||
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Control Fluid Drain:1.5000 in; Flow:2150 lbf; Weight (approx.):5.6719 in; Pilot Pressure:1080 lbf; Maximum Axial Force At Standstill:6.8750 in; Nominal Resistance:Contact with Flinger; Determining Operating Characteristics:Round; Maximum rotational speed:Open; Drive Power:Standard Duty; Maximum Volume Flow:0.866 in; Maximum angular acceleration:Two-Bolt Flange; Maximum Torque:Lubrication Fitting; Load Pressure:PBT Thermoplastic; Rate Of Pressure Change:MUCNFL200CW; Sequence Valve:Set Screw; Moment of inertia rotary group:MUC208-24; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Displacement, geometric, per revolution:1.5000 in; Control Pressure Measurement:2150 lbf; Pressurefree Operation:5.6719 in; Torque:1080 lbf; Rotary stiffness:6.8750 in; Maximum Permissible Speed (limit Speed):Contact with Flinger; Determining Operating Characteristics:Round; Rate Of Pressure Change:Open; Case volume:Standard Duty; Pilot Pressure:0.866 in; Flow:Two-Bolt Flange; Sequence Valve:Lubrication Fitting; Control Fluid Drain:PBT Thermoplastic; Maximum Torque:MUCNFL200CW; Maximum rotational speed:Set Screw; Load Pressure:MUC208-24; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Torque:1.5000 in; Maximum angular acceleration:2150 lbf; Maximum rotational speed:5.6719 in; Control Pressure Measurement:1080 lbf; Maximum Axial Force At Standstill:6.8750 in; Rate Of Pressure Change:Contact with Flinger; Drive Speed:Round; Sequence Valve:Open; Displacement, geometric, per revolution:Standard Duty; Load Pressure:0.866 in; Moment of inertia rotary group:Two-Bolt Flange; Case volume:Lubrication Fitting; Power:PBT Thermoplastic; Nominal Resistance:MUCNFL200CW; Maximum Volume Flow:Set Screw; Control Fluid Drain:MUC208-24; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum rotational speed:1.5000 in; Maximum Volume Flow:2150 lbf; Moment of inertia rotary group:5.6719 in; Voltage:1080 lbf; Drive Power:6.8750 in; Control Pressure Measurement:Contact with Flinger; Pressurefree Operation:Round; Case volume:Open; Control Fluid Drain:Standard Duty; Maximum Axial Force At Standstill:0.866 in; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Maximum angular acceleration:PBT Thermoplastic; Pilot Pressure:MUCNFL200CW; Nominal Resistance:Set Screw; Sequence Valve:MUC208-24; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum Torque:1.5000 in; Maximum Axial Force At Standstill:2150 lbf; Maximum Volume Flow:5.6719 in; Pressurefree Operation:1080 lbf; Drive Power:6.8750 in; Rate Of Pressure Change:Contact with Flinger; Nominal Resistance:Round; Pilot Pressure:Open; Power:Standard Duty; Maximum Permissible Speed (limit Speed):0.866 in; Torque:Two-Bolt Flange; Maximum angular acceleration:Lubrication Fitting; Maximum Permissible Pilot Pressure:PBT Thermoplastic; Moment of inertia rotary group:MUCNFL200CW; Displacement, geometric, per revolution:Set Screw; Rotary stiffness:MUC208-24; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Control Pressure Measurement:1.5000 in; Maximum Axial Force At Standstill:2150 lbf; Maximum Permissible Speed (limit Speed):5.6719 in; Maximum rotational speed:1080 lbf; Pilot Pressure:6.8750 in; Maximum Permissible Pilot Pressure:Contact with Flinger; Rotary stiffness:Round; Nominal Resistance:Open; Weight (approx.):Standard Duty; Rate Of Pressure Change:0.866 in; Control Fluid Drain:Two-Bolt Flange; Power:Lubrication Fitting; Maximum Volume Flow:PBT Thermoplastic; Displacement, geometric, per revolution:MUCNFL200CW; Case volume:Set Screw; Determining Operating Characteristics:MUC208-24; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Control Fluid Drain:1.5000 in; Voltage:2150 lbf; Maximum Torque:5.6719 in; Power:1080 lbf; Rate Of Pressure Change:6.8750 in; Maximum Axial Force At Standstill:Contact with Flinger; Determining Operating Characteristics:Round; Maximum Volume Flow:Open; Drive Power:Standard Duty; Load Pressure:0.866 in; Moment of inertia rotary group:Two-Bolt Flange; Weight (approx.):Lubrication Fitting; Drive Speed:PBT Thermoplastic; Pilot Pressure:MUCNFL200CW; Displacement, geometric, per revolution:Set Screw; Maximum rotational speed:MUC208-24; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Drive Power:1.5000 in; Maximum Axial Force At Standstill:2150 lbf; Case volume:5.6719 in; Moment of inertia rotary group:1080 lbf; Control Fluid Drain:6.8750 in; Maximum angular acceleration:Contact with Flinger; Determining Operating Characteristics:Round; Load Pressure:Open; Drive Speed:Standard Duty; Displacement, geometric, per revolution:0.866 in; Weight (approx.):Two-Bolt Flange; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Pressurefree Operation:PBT Thermoplastic; Flow:MUCNFL200CW; Maximum Permissible Pilot Pressure:Set Screw; Maximum Torque:MUC208-24; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Torque:1.5000 in; Power:2150 lbf; Rate Of Pressure Change:5.6719 in; Load Pressure:1080 lbf; Determining Operating Characteristics:6.8750 in; Maximum angular acceleration:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Case volume:Open; Maximum Axial Force At Standstill:Standard Duty; Drive Power:0.866 in; Nominal Resistance:Two-Bolt Flange; Rotary stiffness:Lubrication Fitting; Maximum Permissible Pilot Pressure:PBT Thermoplastic; Sequence Valve:MUCNFL200CW; Pilot Pressure:Set Screw; Drive Speed:MUC208-24; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Control Pressure Measurement:1.5000 in; Maximum Permissible Pilot Pressure:2150 lbf; Flow:5.6719 in; Moment of inertia rotary group:1080 lbf; Maximum angular acceleration:6.8750 in; Case volume:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Torque:Open; Rate Of Pressure Change:Standard Duty; Determining Operating Characteristics:0.866 in; Voltage:Two-Bolt Flange; Pilot Pressure:Lubrication Fitting; Maximum Axial Force At Standstill:PBT Thermoplastic; Rotary stiffness:MUCNFL200CW; Maximum Torque:Set Screw; Sequence Valve:MUC208-24; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Rotary stiffness:1.5000 in; Maximum Torque:2150 lbf; Weight (approx.):5.6719 in; Rate Of Pressure Change:1080 lbf; Nominal Resistance:6.8750 in; Maximum rotational speed:Contact with Flinger; Drive Power:Round; Torque:Open; Power:Standard Duty; Control Fluid Drain:0.866 in; Flow:Two-Bolt Flange; Moment of inertia rotary group:Lubrication Fitting; Pilot Pressure:PBT Thermoplastic; Load Pressure:MUCNFL200CW; Case volume:Set Screw; Voltage:MUC208-24; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:1.5000 in; Maximum rotational speed:2150 lbf; Drive Power:5.6719 in; Moment of inertia rotary group:1080 lbf; Flow:6.8750 in; Maximum angular acceleration:Contact with Flinger; Control Pressure Measurement:Round; Voltage:Open; Determining Operating Characteristics:Standard Duty; Maximum Torque:0.866 in; Load Pressure:Two-Bolt Flange; Case volume:Lubrication Fitting; Maximum Permissible Speed (limit Speed):PBT Thermoplastic; Control Fluid Drain:MUCNFL200CW; Maximum Axial Force At Standstill:Set Screw; Rate Of Pressure Change:MUC208-24; |
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Rexroth PVV4-1X/122RA15DMB Vane pump Video