##Parts Table 1Rexroth PVV4-1X/069RA15DMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Barrel Washer | 530 mm | 920 mm | 500 mm | 3 Inch | 76.2 Millimeter | ||||
| Block Springs | 288,925 mm | 406,4 mm | 1.875 Inch / 47.625 Millimeter | 1 Piece Solid | ||||
| Pressure Plate | 2.362 Inch | 60 Millimeter | 4.091 Inch | 103.9 Millimeter | 3 Inch | 76.2 Millimeter | N/A | ||||
| Central Shaft | 0.236 Inch | 6 Millimeter | 6 | 1720 | N/A | ||||
| Friction Plate | 27.4 | 31171511 | 350 mm | N/A | ||||
| Back Plate | 4 Bolt Pillow Block; 60MM Bore; 76.2MM Base to Center Height; V Lock Mount; Spherical Roller Bearing; 176.3MM Minimum Bolt Spacing; 242.8MM Bolt Spacing Maximum; Relubricatable; Cast Steel; Triple Lip | 2 mm | 27.4 | N/A | ||||
| Set Plate | [Steel] Steel | Cast Steel | Yoke Type | N/A | ||||
| Shoe Piston | 80 mm | 170 mm | 78 mm | 0.433 Inch | 11 Millimeter | ||||
| Skeleton Oil Seal | 260 mm | 480 mm | 80 mm | Flange Type | ||||
| Ball Joint | 57.15 | 117.475 | 30.162 | 340 mm | ||||
| Bearing Plate | 179 | 16 Kg | 5-3/16 in | 33225/462 | ||||
| Inclined Plate | 280 mm | 350 mm | 69 mm | 4 Bolt Pillow Block | ||||
| Cylinder | 53,975 mm | 127 mm | 44,45 mm | 31171530 | ||||
| The Thrust Plate | 4.091 Inch | 103.9 Millimeter | 288.925x406.4x298.45 | 0.064 | 304 Stainless Steel | ||||
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Control Fluid Drain:1.1250 in; Maximum Torque:2150 lbf; Case volume:4.6094 in; Nominal Resistance:1080 lbf; Pilot Pressure:5.8125 in; Moment of inertia rotary group:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Maximum angular acceleration:0.866 in; Load Pressure:Standard Duty; Voltage:Lubrication Fitting; Weight (approx.):Two-Bolt Flange; Maximum Permissible Pilot Pressure:UENFL200W; Maximum Axial Force At Standstill:PBT Thermoplastic; Pressurefree Operation:UE206-18; Flow:Accu-Loc; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Determining Operating Characteristics:1.1250 in; Moment of inertia rotary group:2150 lbf; Flow:4.6094 in; Drive Power:1080 lbf; Rate Of Pressure Change:5.8125 in; Maximum Volume Flow:Contact with Flinger; Maximum Torque:Round; Torque:0.866 in; Maximum rotational speed:Standard Duty; Sequence Valve:Lubrication Fitting; Case volume:Two-Bolt Flange; Power:UENFL200W; Maximum Axial Force At Standstill:PBT Thermoplastic; Control Fluid Drain:UE206-18; Displacement, geometric, per revolution:Accu-Loc; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Pilot Pressure:1.1250 in; Maximum Torque:2150 lbf; Rotary stiffness:4.6094 in; Sequence Valve:1080 lbf; Moment of inertia rotary group:5.8125 in; Drive Speed:Contact with Flinger; Load Pressure:Round; Case volume:0.866 in; Power:Standard Duty; Voltage:Lubrication Fitting; Nominal Resistance:Two-Bolt Flange; Drive Power:UENFL200W; Rate Of Pressure Change:PBT Thermoplastic; Displacement, geometric, per revolution:UE206-18; Maximum Permissible Pilot Pressure:Accu-Loc; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Load Pressure:1.1250 in; Maximum rotational speed:2150 lbf; Maximum Torque:4.6094 in; Determining Operating Characteristics:1080 lbf; Power:5.8125 in; Flow:Contact with Flinger; Maximum Volume Flow:Round; Nominal Resistance:0.866 in; Control Pressure Measurement:Standard Duty; Voltage:Lubrication Fitting; Displacement, geometric, per revolution:Two-Bolt Flange; Pressurefree Operation:UENFL200W; Maximum Axial Force At Standstill:PBT Thermoplastic; Weight (approx.):UE206-18; Maximum Permissible Speed (limit Speed):Accu-Loc; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Flow:1.1250 in; Maximum angular acceleration:2150 lbf; Maximum Permissible Speed (limit Speed):4.6094 in; Weight (approx.):1080 lbf; Nominal Resistance:5.8125 in; Sequence Valve:Contact with Flinger; Drive Power:Round; Moment of inertia rotary group:0.866 in; Maximum Axial Force At Standstill:Standard Duty; Rotary stiffness:Lubrication Fitting; Control Fluid Drain:Two-Bolt Flange; Pressurefree Operation:UENFL200W; Pilot Pressure:PBT Thermoplastic; Drive Speed:UE206-18; Displacement, geometric, per revolution:Accu-Loc; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Drive Speed:1.1250 in; Maximum Permissible Pilot Pressure:2150 lbf; Rotary stiffness:4.6094 in; Power:1080 lbf; Load Pressure:5.8125 in; Moment of inertia rotary group:Contact with Flinger; Drive Power:Round; Control Pressure Measurement:0.866 in; Nominal Resistance:Standard Duty; Maximum Volume Flow:Lubrication Fitting; Displacement, geometric, per revolution:Two-Bolt Flange; Pilot Pressure:UENFL200W; Sequence Valve:PBT Thermoplastic; Maximum Axial Force At Standstill:UE206-18; Flow:Accu-Loc; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Drive Speed:1.1250 in; Flow:2150 lbf; Torque:4.6094 in; Voltage:1080 lbf; Pilot Pressure:5.8125 in; Pressurefree Operation:Contact with Flinger; Maximum angular acceleration:Round; Determining Operating Characteristics:0.866 in; Nominal Resistance:Standard Duty; Weight (approx.):Lubrication Fitting; Maximum Volume Flow:Two-Bolt Flange; Power:UENFL200W; Rotary stiffness:PBT Thermoplastic; Sequence Valve:UE206-18; Drive Power:Accu-Loc; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Moment of inertia rotary group:1.1250 in; Control Pressure Measurement:2150 lbf; Power:4.6094 in; Pilot Pressure:1080 lbf; Maximum Torque:5.8125 in; Maximum Volume Flow:Contact with Flinger; Drive Speed:Round; Sequence Valve:0.866 in; Flow:Standard Duty; Rate Of Pressure Change:Lubrication Fitting; Maximum Axial Force At Standstill:Two-Bolt Flange; Drive Power:UENFL200W; Case volume:PBT Thermoplastic; Weight (approx.):UE206-18; Load Pressure:Accu-Loc; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Load Pressure:1.1250 in; Moment of inertia rotary group:2150 lbf; Determining Operating Characteristics:4.6094 in; Weight (approx.):1080 lbf; Rotary stiffness:5.8125 in; Maximum Axial Force At Standstill:Contact with Flinger; Pilot Pressure:Round; Rate Of Pressure Change:0.866 in; Maximum Torque:Standard Duty; Pressurefree Operation:Lubrication Fitting; Displacement, geometric, per revolution:Two-Bolt Flange; Drive Speed:UENFL200W; Case volume:PBT Thermoplastic; Control Pressure Measurement:UE206-18; Nominal Resistance:Accu-Loc; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Torque:1.1250 in; Voltage:2150 lbf; Maximum Permissible Speed (limit Speed):4.6094 in; Maximum rotational speed:1080 lbf; Maximum Axial Force At Standstill:5.8125 in; Determining Operating Characteristics:Contact with Flinger; Weight (approx.):Round; Displacement, geometric, per revolution:0.866 in; Nominal Resistance:Standard Duty; Moment of inertia rotary group:Lubrication Fitting; Control Pressure Measurement:Two-Bolt Flange; Control Fluid Drain:UENFL200W; Drive Power:PBT Thermoplastic; Sequence Valve:UE206-18; Rotary stiffness:Accu-Loc; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Drive Power:1.1250 in; Sequence Valve:2150 lbf; Maximum Permissible Speed (limit Speed):4.6094 in; Maximum Volume Flow:1080 lbf; Power:5.8125 in; Weight (approx.):Contact with Flinger; Rate Of Pressure Change:Round; Pilot Pressure:0.866 in; Maximum Torque:Standard Duty; Flow:Lubrication Fitting; Drive Speed:Two-Bolt Flange; Nominal Resistance:UENFL200W; Maximum rotational speed:PBT Thermoplastic; Pressurefree Operation:UE206-18; Torque:Accu-Loc; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Pressurefree Operation:1.1250 in; Control Fluid Drain:2150 lbf; Maximum Volume Flow:4.6094 in; Nominal Resistance:1080 lbf; Maximum rotational speed:5.8125 in; Power:Contact with Flinger; Sequence Valve:Round; Maximum Permissible Speed (limit Speed):0.866 in; Moment of inertia rotary group:Standard Duty; Drive Power:Lubrication Fitting; Rate Of Pressure Change:Two-Bolt Flange; Flow:UENFL200W; Voltage:PBT Thermoplastic; Case volume:UE206-18; Torque:Accu-Loc; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth PVV4-1X/069RA15DMB Vane pump Video