##Parts Table 1Rexroth PVV2-1X/055RJ15UMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Set Plate | 47 mm | 30 mm | 5,9 kN | 0,135 Kg | ||||
| Bearing Plate | 110 mm | 80 mm | 115 kN | 0,85 Kg | ||||
| Cylinder Block | 250 mm | 180 mm | 284 | 8,57 Kg | ||||
| Barrel Washer | 1.813 Inch | 46.05 Millimeter | 1.938 Inch | 49.225 Millimeter | 0.866 Inch | 21.996 Millimeter | 0.77 | ||||
| Push Rod | 1-15/16" Bore; Wide Inner Ring; Ball Bearing; 1-13/16" Length Thru Bore; 0.866" Outer Race Width; 3.543" Outside Diameter; Relubricatable; Single Lip Seal; Collar Mounting Method | 3 mm | http://www.rexnord.com | - | ||||
| Friction Plate | 2.188 Inch | 55.575 Millimeter | 2 Inch | 50.8 Millimeter | 6.8 Inch | 171.5 Millimeter | 4.404 | ||||
| Oil Distribution Plate | Seawater / Low fouling | 0.866 Inch | 21.996 Millimeter | 8,57 Kg | - | ||||
| Snap Ring | 7 Inch | 177.8Millimeter | 20 mm | 25.4 | 0.35 kg | ||||
| Ball Guide | 100 mm | 122 mm / Tolerance: H12 | Yes | - | ||||
| Swash Plate | 9.3750 to 11.2500 in | 3.1875 in | 6.5 Inch | 165.1Millimeter | 296 mm | ||||
| Bearings | 830 mm | 460 mm | 296 mm | 284 | ||||
| Cylinder Blocks | 130 mm | 85 mm | 739090 | 5/8 Inch | ||||
| Bushing Spring | 46 mm | 1,1 mm | 360 r/min | 112 mm | ||||
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Rotary stiffness:3.0000 in; Nominal Resistance:Cast Iron; Moment of inertia rotary group:3.7500 in; Determining Operating Characteristics:Tapered Roller; Maximum angular acceleration:12.5938 in; Power:Uncoated; Maximum Permissible Pilot Pressure:7.9200 in; Load Pressure:037640; Maximum Volume Flow:Two-Bolt Base; Maximum Axial Force At Standstill:11 in; Control Pressure Measurement:Split Pillow Block; Rate Of Pressure Change:3-1/2 in; Displacement, geometric, per revolution:3.0000 in; Control Fluid Drain:037561; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Pressurefree Operation:3.0000 in; Determining Operating Characteristics:Cast Iron; Load Pressure:3.7500 in; Maximum Permissible Speed (limit Speed):Tapered Roller; Flow:12.5938 in; Pilot Pressure:Uncoated; Nominal Resistance:7.9200 in; Case volume:037640; Sequence Valve:Two-Bolt Base; Maximum Volume Flow:11 in; Drive Speed:Split Pillow Block; Rotary stiffness:3-1/2 in; Torque:3.0000 in; Maximum Permissible Pilot Pressure:037561; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Pilot Pressure:3.0000 in; Maximum rotational speed:Cast Iron; Maximum Permissible Speed (limit Speed):3.7500 in; Torque:Tapered Roller; Drive Power:12.5938 in; Weight (approx.):Uncoated; Control Fluid Drain:7.9200 in; Moment of inertia rotary group:037640; Maximum Axial Force At Standstill:Two-Bolt Base; Maximum Torque:11 in; Maximum angular acceleration:Split Pillow Block; Maximum Permissible Pilot Pressure:3-1/2 in; Voltage:3.0000 in; Power:037561; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Determining Operating Characteristics:3.0000 in; Maximum Torque:Cast Iron; Moment of inertia rotary group:3.7500 in; Maximum angular acceleration:Tapered Roller; Drive Speed:12.5938 in; Maximum Permissible Pilot Pressure:Uncoated; Sequence Valve:7.9200 in; Pilot Pressure:037640; Torque:Two-Bolt Base; Displacement, geometric, per revolution:11 in; Voltage:Split Pillow Block; Rate Of Pressure Change:3-1/2 in; Drive Power:3.0000 in; Control Fluid Drain:037561; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Drive Power:3.0000 in; Moment of inertia rotary group:Cast Iron; Maximum Volume Flow:3.7500 in; Maximum angular acceleration:Tapered Roller; Determining Operating Characteristics:12.5938 in; Rate Of Pressure Change:Uncoated; Maximum Axial Force At Standstill:7.9200 in; Voltage:037640; Sequence Valve:Two-Bolt Base; Displacement, geometric, per revolution:11 in; Maximum rotational speed:Split Pillow Block; Control Pressure Measurement:3-1/2 in; Torque:3.0000 in; Drive Speed:037561; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum rotational speed:3.0000 in; Maximum Permissible Speed (limit Speed):Cast Iron; Determining Operating Characteristics:3.7500 in; Torque:Tapered Roller; Case volume:12.5938 in; Maximum Permissible Pilot Pressure:Uncoated; Maximum Axial Force At Standstill:7.9200 in; Displacement, geometric, per revolution:037640; Drive Power:Two-Bolt Base; Maximum Volume Flow:11 in; Power:Split Pillow Block; Pressurefree Operation:3-1/2 in; Pilot Pressure:3.0000 in; Control Fluid Drain:037561; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Nominal Resistance:3.0000 in; Flow:Cast Iron; Power:3.7500 in; Control Pressure Measurement:Tapered Roller; Determining Operating Characteristics:12.5938 in; Load Pressure:Uncoated; Pressurefree Operation:7.9200 in; Voltage:037640; Rate Of Pressure Change:Two-Bolt Base; Displacement, geometric, per revolution:11 in; Maximum angular acceleration:Split Pillow Block; Maximum rotational speed:3-1/2 in; Maximum Permissible Pilot Pressure:3.0000 in; Torque:037561; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum rotational speed:3.0000 in; Maximum Torque:Cast Iron; Drive Speed:3.7500 in; Control Pressure Measurement:Tapered Roller; Load Pressure:12.5938 in; Maximum angular acceleration:Uncoated; Pilot Pressure:7.9200 in; Voltage:037640; Weight (approx.):Two-Bolt Base; Nominal Resistance:11 in; Maximum Volume Flow:Split Pillow Block; Maximum Permissible Pilot Pressure:3-1/2 in; Maximum Permissible Speed (limit Speed):3.0000 in; Rate Of Pressure Change:037561; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Control Fluid Drain:3.0000 in; Moment of inertia rotary group:Cast Iron; Power:3.7500 in; Weight (approx.):Tapered Roller; Maximum Volume Flow:12.5938 in; Maximum Permissible Speed (limit Speed):Uncoated; Maximum Axial Force At Standstill:7.9200 in; Maximum Torque:037640; Control Pressure Measurement:Two-Bolt Base; Torque:11 in; Case volume:Split Pillow Block; Maximum angular acceleration:3-1/2 in; Determining Operating Characteristics:3.0000 in; Nominal Resistance:037561; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Volume Flow:3.0000 in; Maximum Torque:Cast Iron; Moment of inertia rotary group:3.7500 in; Displacement, geometric, per revolution:Tapered Roller; Maximum angular acceleration:12.5938 in; Control Pressure Measurement:Uncoated; Rate Of Pressure Change:7.9200 in; Sequence Valve:037640; Case volume:Two-Bolt Base; Maximum Axial Force At Standstill:11 in; Voltage:Split Pillow Block; Rotary stiffness:3-1/2 in; Drive Power:3.0000 in; Maximum rotational speed:037561; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Sequence Valve:3.0000 in; Rate Of Pressure Change:Cast Iron; Displacement, geometric, per revolution:3.7500 in; Pressurefree Operation:Tapered Roller; Moment of inertia rotary group:12.5938 in; Maximum Permissible Speed (limit Speed):Uncoated; Maximum Torque:7.9200 in; Torque:037640; Case volume:Two-Bolt Base; Maximum rotational speed:11 in; Load Pressure:Split Pillow Block; Control Fluid Drain:3-1/2 in; Voltage:3.0000 in; Rotary stiffness:037561; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Weight (approx.):3.0000 in; Sequence Valve:Cast Iron; Load Pressure:3.7500 in; Torque:Tapered Roller; Case volume:12.5938 in; Displacement, geometric, per revolution:Uncoated; Drive Power:7.9200 in; Maximum Permissible Speed (limit Speed):037640; Drive Speed:Two-Bolt Base; Rate Of Pressure Change:11 in; Maximum Axial Force At Standstill:Split Pillow Block; Maximum Volume Flow:3-1/2 in; Control Pressure Measurement:3.0000 in; Pilot Pressure:037561; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV2-1X/055RJ15UMB Vane pump Video