##Parts Table 1Rexroth PVV2-1X/040RJ15UMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Gear Pump | 434,975 mm | 434,975 | CN | 434,975 mm | ||||
| The Thrust Plate | 47.62 mm | 190 mm | 3,3 mm | 51.6 mm | ||||
| Central Shaft | Click here | C3-Loose | 19 mm | 35.1 kN | ||||
| Set Plate | 23.2 kN | 90MM Bore; 140MM Outside Diameter; 24MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage | 0.945 Inch | 24 Millimeter | 54.6 mm | ||||
| Ball Joint | 1.575 Inch | 40 Millimeter | 444 mm | 3.543 Inch | 90 Millimeter | 3,3 mm | ||||
| Ball Guide | 40MM Bore; 90MM Outside Diameter; 23MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; Yes Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cage | Class 0 | 8 | 9 mm | ||||
| Saddle Bearing | 415,925 mm | 590,55 | 590,55 mm | 434,975 mm | ||||
| Regulator | 90 mm | 5.512 Inch | 140 Millimeter | 140 mm | 24 mm | ||||
| Set Plate | 3 mm | 10 | 10 mm | 4 mm | ||||
| Swing | 15.6 | 25.8 mm | 90MM Bore; 140MM Outside Diameter; 24MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage | 23.2 kN | ||||
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:1.7500 in; Displacement, geometric, per revolution:3690 lbf; Maximum rotational speed:5.1250 in; Maximum Volume Flow:Contact with Flinger; Voltage:6.1250 in; Flow:1.937 in; Load Pressure:Round; Control Fluid Drain:4-1/4 in; Control Pressure Measurement:Standard Duty; Sequence Valve:1.408 in; Rate Of Pressure Change:Four-Bolt Piloted; Drive Speed:1/2; Maximum Permissible Speed (limit Speed):Cast Iron - Nickel Protection; Determining Operating Characteristics:Lubrication Fitting; Moment of inertia rotary group:Set Screw; Case volume:MUCFCS200NP; Power:6320 lbf; Maximum angular acceleration:MUC209-28; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Moment of inertia rotary group:1.7500 in; Sequence Valve:3690 lbf; Pressurefree Operation:5.1250 in; Maximum Torque:Contact with Flinger; Rotary stiffness:6.1250 in; Control Pressure Measurement:1.937 in; Power:Round; Maximum Axial Force At Standstill:4-1/4 in; Determining Operating Characteristics:Standard Duty; Maximum rotational speed:1.408 in; Drive Power:Four-Bolt Piloted; Flow:1/2; Voltage:Cast Iron - Nickel Protection; Load Pressure:Lubrication Fitting; Nominal Resistance:Set Screw; Maximum Permissible Speed (limit Speed):MUCFCS200NP; Displacement, geometric, per revolution:6320 lbf; Maximum Permissible Pilot Pressure:MUC209-28; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Displacement, geometric, per revolution:1.7500 in; Pressurefree Operation:3690 lbf; Moment of inertia rotary group:5.1250 in; Pilot Pressure:Contact with Flinger; Nominal Resistance:6.1250 in; Drive Speed:1.937 in; Sequence Valve:Round; Maximum Permissible Pilot Pressure:4-1/4 in; Control Fluid Drain:Standard Duty; Maximum Permissible Speed (limit Speed):1.408 in; Maximum Axial Force At Standstill:Four-Bolt Piloted; Control Pressure Measurement:1/2; Maximum Volume Flow:Cast Iron - Nickel Protection; Weight (approx.):Lubrication Fitting; Case volume:Set Screw; Power:MUCFCS200NP; Load Pressure:6320 lbf; Maximum Torque:MUC209-28; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Load Pressure:1.7500 in; Pressurefree Operation:3690 lbf; Drive Power:5.1250 in; Pilot Pressure:Contact with Flinger; Maximum angular acceleration:6.1250 in; Control Fluid Drain:1.937 in; Moment of inertia rotary group:Round; Maximum Permissible Speed (limit Speed):4-1/4 in; Voltage:Standard Duty; Displacement, geometric, per revolution:1.408 in; Weight (approx.):Four-Bolt Piloted; Maximum Torque:1/2; Torque:Cast Iron - Nickel Protection; Maximum Permissible Pilot Pressure:Lubrication Fitting; Power:Set Screw; Case volume:MUCFCS200NP; Control Pressure Measurement:6320 lbf; Rotary stiffness:MUC209-28; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Moment of inertia rotary group:1.7500 in; Maximum Volume Flow:3690 lbf; Case volume:5.1250 in; Power:Contact with Flinger; Rate Of Pressure Change:6.1250 in; Control Pressure Measurement:1.937 in; Determining Operating Characteristics:Round; Rotary stiffness:4-1/4 in; Drive Power:Standard Duty; Torque:1.408 in; Control Fluid Drain:Four-Bolt Piloted; Weight (approx.):1/2; Maximum rotational speed:Cast Iron - Nickel Protection; Load Pressure:Lubrication Fitting; Maximum Torque:Set Screw; Displacement, geometric, per revolution:MUCFCS200NP; Pilot Pressure:6320 lbf; Maximum angular acceleration:MUC209-28; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Determining Operating Characteristics:1.7500 in; Load Pressure:3690 lbf; Rotary stiffness:5.1250 in; Moment of inertia rotary group:Contact with Flinger; Maximum Permissible Pilot Pressure:6.1250 in; Maximum rotational speed:1.937 in; Weight (approx.):Round; Control Fluid Drain:4-1/4 in; Pressurefree Operation:Standard Duty; Rate Of Pressure Change:1.408 in; Maximum Permissible Speed (limit Speed):Four-Bolt Piloted; Drive Speed:1/2; Maximum Volume Flow:Cast Iron - Nickel Protection; Flow:Lubrication Fitting; Drive Power:Set Screw; Maximum Axial Force At Standstill:MUCFCS200NP; Pilot Pressure:6320 lbf; Case volume:MUC209-28; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Moment of inertia rotary group:1.7500 in; Drive Speed:3690 lbf; Voltage:5.1250 in; Pilot Pressure:Contact with Flinger; Control Pressure Measurement:6.1250 in; Rotary stiffness:1.937 in; Drive Power:Round; Power:4-1/4 in; Maximum Permissible Pilot Pressure:Standard Duty; Maximum Volume Flow:1.408 in; Maximum rotational speed:Four-Bolt Piloted; Control Fluid Drain:1/2; Load Pressure:Cast Iron - Nickel Protection; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Weight (approx.):Set Screw; Determining Operating Characteristics:MUCFCS200NP; Flow:6320 lbf; Nominal Resistance:MUC209-28; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Pressurefree Operation:1.7500 in; Torque:3690 lbf; Power:5.1250 in; Control Pressure Measurement:Contact with Flinger; Flow:6.1250 in; Maximum Permissible Pilot Pressure:1.937 in; Maximum Axial Force At Standstill:Round; Maximum angular acceleration:4-1/4 in; Case volume:Standard Duty; Nominal Resistance:1.408 in; Maximum rotational speed:Four-Bolt Piloted; Control Fluid Drain:1/2; Maximum Permissible Speed (limit Speed):Cast Iron - Nickel Protection; Load Pressure:Lubrication Fitting; Rate Of Pressure Change:Set Screw; Weight (approx.):MUCFCS200NP; Displacement, geometric, per revolution:6320 lbf; Maximum Volume Flow:MUC209-28; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Axial Force At Standstill:1.7500 in; Nominal Resistance:3690 lbf; Maximum Volume Flow:5.1250 in; Torque:Contact with Flinger; Weight (approx.):6.1250 in; Maximum Torque:1.937 in; Voltage:Round; Sequence Valve:4-1/4 in; Maximum Permissible Pilot Pressure:Standard Duty; Determining Operating Characteristics:1.408 in; Power:Four-Bolt Piloted; Case volume:1/2; Control Pressure Measurement:Cast Iron - Nickel Protection; Flow:Lubrication Fitting; Control Fluid Drain:Set Screw; Displacement, geometric, per revolution:MUCFCS200NP; Load Pressure:6320 lbf; Drive Power:MUC209-28; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Control Pressure Measurement:1.7500 in; Maximum rotational speed:3690 lbf; Determining Operating Characteristics:5.1250 in; Power:Contact with Flinger; Maximum angular acceleration:6.1250 in; Rotary stiffness:1.937 in; Displacement, geometric, per revolution:Round; Maximum Permissible Speed (limit Speed):4-1/4 in; Nominal Resistance:Standard Duty; Maximum Torque:1.408 in; Pressurefree Operation:Four-Bolt Piloted; Maximum Permissible Pilot Pressure:1/2; Sequence Valve:Cast Iron - Nickel Protection; Drive Power:Lubrication Fitting; Load Pressure:Set Screw; Flow:MUCFCS200NP; Torque:6320 lbf; Rate Of Pressure Change:MUC209-28; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Drive Speed:1.7500 in; Pressurefree Operation:3690 lbf; Maximum rotational speed:5.1250 in; Maximum Volume Flow:Contact with Flinger; Maximum Permissible Speed (limit Speed):6.1250 in; Sequence Valve:1.937 in; Load Pressure:Round; Weight (approx.):4-1/4 in; Moment of inertia rotary group:Standard Duty; Case volume:1.408 in; Torque:Four-Bolt Piloted; Displacement, geometric, per revolution:1/2; Pilot Pressure:Cast Iron - Nickel Protection; Maximum Permissible Pilot Pressure:Lubrication Fitting; Voltage:Set Screw; Power:MUCFCS200NP; Maximum Axial Force At Standstill:6320 lbf; Flow:MUC209-28; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Flow:1.7500 in; Maximum Axial Force At Standstill:3690 lbf; Voltage:5.1250 in; Moment of inertia rotary group:Contact with Flinger; Maximum Volume Flow:6.1250 in; Power:1.937 in; Control Fluid Drain:Round; Sequence Valve:4-1/4 in; Displacement, geometric, per revolution:Standard Duty; Pilot Pressure:1.408 in; Torque:Four-Bolt Piloted; Drive Power:1/2; Maximum Permissible Speed (limit Speed):Cast Iron - Nickel Protection; Determining Operating Characteristics:Lubrication Fitting; Maximum angular acceleration:Set Screw; Drive Speed:MUCFCS200NP; Maximum Torque:6320 lbf; Load Pressure:MUC209-28; |
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVV2-1X/040RJ15UMB Vane pump Video